理想弹塑性固体Riemann问题的解结构与初值条件

针对理想弹塑性固体材料的一维Riemann问题，在不考虑真空的情况下，讨论其所有可能存在的解结构，给出每一种解结构下对应的初值条件且证明该系列初值条件的完备性，即任意给定的物理量初值均有且只有一种解结构与之对应.基于该理论，在设计精确或近似理想弹塑性Riemann问题求解器时，可以依据初值条件对任意物理量初值直接判断其对应的解结构，从而提高求解器的精度和效率.数值试验验证了该系列初值条件的正确性和有效性.     

角锥棱镜谐振腔激光模式模拟研究

为了探究角锥棱镜谐振腔激光模式,以角锥-平面镜腔为例,将角锥棱镜等效为衍射光栅,考虑角锥镜棱宽在谐振腔中的衍射效应以及二面角误差引起的附加相位分布对谐振腔激光模式的影响,在光学谐振腔理论的基础上,建立了求解本征模式的理论分析模型.采用快速傅里叶法数值模拟不同腔长、角锥镜棱宽和二面角误差情况下该无源谐振腔激光输出模式分布情况.结果表明,在腔长30 cm、角锥镜棱宽小于75μm、二面角误差在-10′~5′之间时,可实现光斑完整的圆形分布输出模式,且有较好的光束质量;棱宽不小于0.4 mm,二面角误差在-40′~10′之间时,光斑为TEM 03阶横模,光场呈六瓣分布;当角锥镜棱宽为0.4 mm、二面角误差为3′,腔长从30~90 cm范围内增加时,该谐振腔输出的激光模式从TEM 03转换成TEM 10.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

无水坝抽水蓄能系统高压溶气问题研究

无水坝抽水蓄能系统利用封闭容器内的高压气体构建虚拟水坝,是兼具压缩空气储能和抽水蓄能优点的新型储能系统。但该系统的封闭容器内水和气在高压状态共存有可能造成水中溶气,从而对水轮机造成汽蚀等破坏。本文采用实际气体状态方程及分子动力学模拟方法,研究了宽广的压力、温度范围下气体在水中的溶解及扩散规律,揭示了水中气体溶解量随时间和水深的变化规律。研究结果表明释能结束后保证水-气共容舱内剩余水的高度大于0.5 m时,高压溶气不会对水轮机产生危害,该结论对系统的工程应用及推广具有指导意义。     

利用相位步进脉冲消除探头13C NMR背景信号

由静态探头线圈外有机材料产生的¹³C NMR背景信号强度大，化学位移范围广（δ_C 20~250），此背景信号在交叉极化实验中还可被增强，并随着样品信号的累积而累积，严重影响谱图分析.将相位步进脉冲引入交叉极化实验（称为PIPCP）中可以有效去除经交叉极化增强的¹³C NMR背景信号，但样品信号不受影响.这是由于经过相位步进脉冲后，线圈外相位严重畸变，而且线圈外锁定场强度急剧降低，来自探头材料的¹³C NMR背景信号无法有效地进行交叉极化.而对于被测样品甘氨酸来说，由于I核和S核之间强烈的偶极耦合作用，所加相位步进脉冲对锁定场强度的影响只有1.4%.     

非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

Oxidative Addition of Dihydrogen to Divanadium in Solid Ne: Multiple‐Bonded Triplet HVVH and Singlet V2(μ‐H)2

Dinuclear compounds of early transition metals with a high metal–metal bond order are of fundamental interest due to their intriguing bonding situation and of practical interest because of their potential involvement in catalytic processes. In this work, two isomers of V₂H₂ have been generated in solid Ne by the reaction between V₂ and H₂ and detected by infrared spectroscopy: the linear HVVH molecule (³Σ_g^? ground state), which is the product of the spin‐allowed reaction between V₂ (³Σ_g^? ground state) and H₂, and a lower‐energy, folded V₂(μ‐H)₂ isomer (¹A₁ ground state) with two bridging hydrogen atoms. Both isomers are characterized by metal–metal bonding with a high bond order; the orbital occupations point to quadruple bonding. Irradiation with ultraviolet light induces the transformation of linear HVVH to folded V₂(μ‐H)₂, whereas irradiation with visible light initiates the reverse reaction.     

Improved neural networks based on genetic algorithm for pulse recognition

Pulse diagnosis is an important part of Chinese medicine and has played an important role in the development of Chinese medical science. However, the pulse is traditionally determined by cutting it off, which leads to a lack of objective standard pulse identification methods and affects their accuracy and feasibility. This research has studied and discussed the processing and identification of four kinds of pulse: normal pulse, wiry pulse, smooth pulse, and thready pulse. Four frequency-domain characteristics of the pulse wave and six kinds of wavelet scale energy characteristic information were extracted, and a three-layer BP (backprocessing) neural network was established. The LM (Levenberg–Marquard) algorithm and a genetic algorithm were used to improve the BP neural network, to train on and predict experimental samples, and to obtain classification accuracies of 90% and 95% respectively. Moreover, improved BP neural network based on a genetic algorithm has shown highly superior performance in terms of convergence speed and low error rate.     

基于数字全息的热透镜效应测量

提出一种数字全息定量测量半导体激光二极管侧面泵浦Nd∶YAG晶体热透镜效应的方法。CCD采集Nd∶YAG晶体在不同泵浦电流下的数字全息图,通过数值重建得到热透镜效应引起的相位分布及其变化过程。再由相位分布计算得到对应的热透镜焦距。实验结果表明,利用数字全息技术可以准确和有效测量热透镜效应及热透镜焦距。